This is the RS485 version of the popular N1020 which adds terminals for hardwired connection to serial networks and internal parameters for network setup.
Great for:
- Confined spaces/small fascia (1/32 DIN)
- Universal input, added functions
- Auto-adaptive algorithm
- USB programmable
- Replaces CAL3300, Omron E5GC
Typical Uses:
- Small form packaging machines
- Ovens and kilns
- Laboratory equipment
- Incubators
The N1020 is a small and yet powerful temperature controller. It accepts most of the temperature sensors used in industry and its 2 outputs can be configured independently as control or alarm output. It also embeds an auto-adaptive PID control algorithm for best system performance.
Configuration can be performed either directly on the controller or via the USB interface with QuickTune software. Once connected to USB, the device will be recognized as a serial communication (COM) port operating with Modbus RTU protocol.
MPN 8102020010
Novus N1020-PR- Manual Download
- USB interface 2.0, CDC class (virtual communications port), USB connector: mini B, Modbus RTU protocol
- High brightness red LED display
- Universal input: thermocouples, Pt100 RTD and 50 mV
- Auto-adaptive PID control
- PID parameters auto-tuning
- Dual output: 1 pulse and 1 relay
- Output functions: control, alarm 1, alarm 2
- Configurable alarms with 8 different functions
- Alarm inhibit function at start up
- Programmable timer
- “F” key with 3 possible functions
- Soft-start function
- Measured value offset
- Minimum and maximum limits for SP setting
- Minimum and maximum limits for output value
- Access password for configuration protection
- Factory calibration settings restoration feature
- Silicone keypad
- Front pannel: IP65, polycarbonate UL94 V-2
- Enclosure: IP20, polycarbonate UL94 V-2
- CE and UL certifications