- Fast upgrade for basic transducers
- Local readout of process value
- Built in scaling and alarms
- Ultra simple installation
- Works with NP640 and similar devices
LoopView is a two-wire 4-20 mA loop indicator, that can display measurements like pressure, differential pressure, flow, pH, temperature, acceleration and more. It has a valve type connector standard EN 175301-803 (old DIN 43650 form A) male and female.
LoopView is powered by the current loop itself and allows to be inserted into sensors already installed in industrial facilities, with same connector type. This device has a 4-digit display and 2 keys, which allows quick and easy adjustment in indication value and range, decimal point position, applying digital signal filter and user calibration.
The parameters modification is password protected and can be done directly in the loop indicator, through panel keys. The configured parameters are stored in non-volatile memory, that means keeps it saved on loop break occurrence.
Novus LoopView Datasheet Download
Novus LoopView Manual Download
- Display: 4-digit red LED display
- Indicating Range: -1999 to 9999 or 9999 to -1999
- Configuration: External push buttons
- Accuracy: 0.1 % of span ± 1digit
- Measuring Rate: 10 measurements/s
- Data back-up: Non-Volatil EEPROM
- Thermal coefficient: 0.005 % / °C of span
- Advanced Features:
Increasing or decreasing indication
Alarm indication
Parameters protection with password
- Electrical Connection: EN 175301-803 A standard (DIN 43650 form A)
- Power Supply: 4-20mA loop powered
- Max current load: 60 mA
- Voltage Drop:
Below than 10 mA: < 5.4 V
10 to 12 mA: < 3.9 V
Higher than 12 mA: < 2.8 V
- Operation Conditions: -40 to 85 °C
- Dimensions: 42.5 x 52.5 x 40.7 mm
- Housing material: ABS (polyurethane gasket)
- Protection Rate: IP65, NEMA4X
- Certification: CE, RoHS
- Warranty: 3 years