CP Series Plastic 2NO (II-0-I) 60° Selector Single Spring Return 22 mm Control Unit
Separate signals can be generated from the two positions:
Left turn - the switch returns to the centre position upon release
Right turn - the switch remains in the outer position until switched back
Centre OFF Stay Put (no contact block)
Left Turn Momentary ON (1 x normally open contact)
Right Turn Stay Put ON (1 x normally open contact)
Left turn - the switch returns to the centre position upon release
Right turn - the switch remains in the outer position until switched back
Centre OFF Stay Put (no contact block)
Left Turn Momentary ON (1 x normally open contact)
Right Turn Stay Put ON (1 x normally open contact)
- Additional C1 and C2 contacts can be added
- It is possible to illuminate from the rear of the selector using a CB light module
- Marking legend holders are available.. BROZET08, BROZET18
Product
Control Unit
Model
Selector
Type
Single Spring Return
Label/Position
(II-0-I) 60°
Contact
2NO
Dia
22 mm
Current (Ie)
4 A (230V AC)
Usage Category
AC 15
Mechanical Life (Min Qty)
500000
Electrical Life (Min Qty)
100000
Operating Frequency (On-Off/Hour)
Mech. 3000 Elec. 1200
Insulation Voltage (Ui)
300V
Impulse Withstand Voltage (Uimp)
2.5 kV
Dielectric Strength (Body-Contact)
2.500V AC
Dielectric Strength (Contact-Contact)
1.500V AC
Isolation Resistance
10 MΩ min. (500V DC)
Operating Temperature
-15 / + 80 °C
Pollution Degree
3
Protection Degree
IP65
Contact Material
AgNi
Cable Section
1.5-2.5 mm2
Screw Torque
1,5 Nm
Short Circuit Breaking Capacity (Ics)
1 kA
Serial
CP Series Plastic